Delta Rockwell Import 14" Bandsaw Upper Blade Ball Bearing Guide upgrade LBS-131

Description

Delta & Import 14" Bandsaw Upper Blade Ball Bearing Side Guide Support fork.
Fits older 14" Delta Bandsaws upper guide casting as well as newer and 14" Jet, Grizzly , Late Powermatic, Bridgewood, Sunhill, Woodtech, ect...
Interchanges with Delta part number   LBS-131 or 426-02-014-0004
Adjustable ball bearings support the side of the blade by means of cam adjustment.
Installation on Delta may not allow use of micro adjusting nut for bearing fork.
Note:Should you find the assembly does not clear the trust bearing on your saw:
1- The trust bearing is mounted on a hex shaft that has an eccentric end. Remove the hex shaft and turn the eccentric away from the guide fork for clearance.
2-If that does not give you enough clearance then the groove on the rear of this for the miro adjusting nut may need to be on the wrong side to use it. If so you will need to remove the microadjusting nut and turn the guide fork upside down for clearance. You can then adjust adjust the fork by simply sliding it forward or rearward by hand.
-The shank extends 1-3/4" from the block housing
-The ball bearings are mounted on eccentric that allow you to swing them away from the guides thrust ball bearing and close to your blade.
VERIFY THE FOLLOWING DIMENSIONS WILL FIT ON YOUR SAW. 5/16" thick, 9/16" tall 1-11/16" long mounting shaft. This is slightly smaller than the original fork, (3/8" X 5/8"), but the thumb screw will hold it tightly.
Fits these
Delta saws:
28-141, 28-200, 28-203, 28-205, 28-207, 28-209,28-216, 28-230, 28-231, 28-240, 28-241, 28-243, 28-245, 28-248, 28-254, 255,
28-
262,
28-
263,
28-
269,
28-
270,
28-
275,
28-
278,
28-
280,
28-
283,
28-
285,
28-
290,
28-
293,
28-
299
, 3
28-
03,
28-
306,
28-
345,
28-
348,
28-
350,
28-
365,
28-
366,
28-
380,
28-
475,
28-
651,
28-
652,
28-
653,
28-
654,
28-
656,
28-
662 and others.
GUIDE ADJUSTMENT:
To adjust the guide first move both upper and lower guides away from blade so it does not touch them.Next track your blade so it is in the center of the wheels.  Then move the lower side guides so that they just touch the blade behind the teeth. Repeat with upper guide. Then adjust the thrust bearings so that they almost touche the rear edge of the blade with no load.
Some customer comments about this item:
Nice piece, shipped quickly. Thanks,
Fast shipping great product,
Great,
Outstanding seller! 5 mins. to install& adjust, great upgrade to my machine!,
As described, Super fast shipping, Thanks!,
Item was shipped quickly, packed well, and was as described.,
Great after the sale support!,
very nice--fast shipping,
Good service after the sale- solved my problem (my fault, not theirs),
FAST SHIPPING GREAT ITEM,
Item received as described! Great transaction!,
Delivered very quickly, item as described,
Best money I ever spent! turned my saw from a dud to a hero!,
Fast shipping> Thank you,
good product at a good price,
Perfect Upgrade for my old saw!,
Great to Deal With,
5-Star Seller. Great price and fast shipping!,
Parfait !,
just what i ordered, fast shipping,
Item arrived promptly and was as described,
Great transaction. Thanks!,
fits like a glove. As advertised. Quickly slipped at a good price,
Very nice replacement,
Great seller. New,
As described, fast shipping. Thanks,
5*****seller very fast shipping quality up grade you need one A+A+A++++++++++++,Thank You for quick response. These are great parts for my band saw thank you for supplying it. will buy from you again. I have received item along with other items,
FAst shipping, good communication,packaged good, item as shown, will do it again,
Easy fast great transaction AAAA+
***Many other bandsaw parts available such as tires, bearings, hinge & upper shaft assembly, table alignment pin, throat plates, riser block kits, rebuild kits etc. for sale in my store*** Click "See sellers other items" link  to view them.
See my other Delta Bandsaw parts like:
ball bearing guide upgrade ebay item #
151063016792
Riser block kit for 1" guide post  Item # 151086232442
Riser block kit for 7/8" Hex post Item # 111143299381
Rear trunnion item # 111019161635
Front trunnion Item # 111031968907
Front and rear trunnion set Item # 152830840894
Tires Item # 111172333649
Upper wheel tension slide Item # 151466487407
Hinge & shaft Ebay item 150975435851
Entire Tension assembly Ebay item 150906690327
Table alignment pin Item # 111184452081111184452081
Blade tension spring Item #111322075848
(2) pairs guide thrust bearings Item # 111322075848
Upper Wheel Bearings Item 150596190651
Older lower wheel bearings (Old Style) Item # 150665038145
Upper wheel bearings (Old Style) Item # 150665038145
Trunnion clamp shoe Item # 151893279403
*Buyer is responsible for custom charges from their country*
All shipments go to the paypal address at time of payment. If you want it shipped somewhere else you  must contact me before paying. No refunds given for shipments delivered to paypal address at time of payment unless we specifically agreed to ship to a different address BEFORE payment.
20% restocking fee on returns
All sales ship to address registered with Ebay at the time of the sale.